Industrial Total Suspended Solids (TSS) Meter

★ Model No: TBG-2087S ★ Output:  4-20mA ★ Communication Protocol: Modbus RTU RS485 ★ Measure Parameters: TSS, Temperature ★ Features: IP65 protection grade, 90-260VAC wide power supply ★ Application: power plant, fermentation, tap water, industrial water

Products Details

Introduction The transmitter can be used to display data measured by the sensor, so the user can get the 4-20mA analog output by transmitter’s interface configuration and calibration. And it can make relay control, digital communications, and other functions a reality. The product is widely used in sewage plant, water plant, water station, surface water, farming, industry and other fields. Technical Parameters

Measuring range

0~1000mg/L, 0~99999 mg/L, 99.99~120.0 g/L

Accuracy

±2%

Size

144*144*104mm  L*W*H

Weight

0.9kg

Shell Material

ABS

Operation Temperature 0 to 100℃
Power Supply 90 – 260V AC 50/60Hz
Output 4-20mA
Relay 5A/250V AC      5A/30V DC
Digital Communication MODBUS RS485 communication function, which can transmit real-time measurements
Waterproof Rate IP65

Warranty Period

1 year

What Total Suspended Solids(TSS)? Total suspended solids, as a measurement of mass are reported in milligrams of solids per liter of water (mg/L) 18. Suspended sediment is also measured in mg/L 36. The most accurate method of determining TSS is by filtering and weighing a water sample 44. This is often time consuming and difficult to measure accurately due to the precision required and the potential for error due to the fiber filter 44. Solids in water are either in true solution or suspended. Suspended solids remain in suspension because they are so small and light. Turbulence resulting from wind and wave action in impounded water, or the movement of flowing water helps maintain particles in suspension. When turbulence decreases, coarse solids quickly settle from water. Very small particles, however, may have colloidal properties, and can remain in suspension for long periods even in completely still water. The distinction between suspended and dissolved solids is somewhat arbitrary. For practical purposes, filtration of water through a glass fiber filter with openings of 2 μ is the conventional way of separating dissolved and suspended solids. Dissolved solids pass through the filter, while suspended solids remain on the filter.

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours